Chad;
If you are making a double page spread from two pieces of board first butt
the pages against one another. Don't overlap the edges. Tape the pages
from behind using "Drafting Tape". Cellophane tape will rip to easily and
masking tape will proably rip the paper when the tape is removed. I've
found it easiest when inking a double page spread to ink all the things that
need the pages together first. Then seperate the two pages and work on them
individualy. Don't worry about putting them back together as they will
just be taken apart at the office when you send them in
I hope this helps.
John
